=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.02.21 13:42:57 =~=~=~=~=~=~=~=~=~=~=~= U-Boot 2016.03-g28cc50d-dirty (Dec 22 2020 - 17:29:28 +0800) CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 115C) at 36C Reset cause: POR Board: MYD-Y6ULL 14x14 DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC0 Error: FEC0 address not set. Normal Boot Hit any key to stop autoboot: 3  2  1  0 NAND read: device 0 offset 0x600000, size 0xa00000 10485760 bytes read: OK NAND read: device 0 offset 0x1000000, size 0x100000 1048576 bytes read: OK Kernel image @ 0x80800000 [ 0x000000 - 0x5f0958 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c149 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.1.15+ (root@localhost) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #5 SMP PREEMPT Tue Dec 22 17:43:28 CST 2020 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Freescale i.MX6 ULL 14x14 EVK Board Reserved memory: failed to allocate memory for node 'linux,cma' Memory policy: Data cache writealloc PERCPU: Embedded 12 pages/cpu @8fdd3000 s16960 r8192 d24000 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttymxc0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs mtdparts=gpmi-nand:5m(boot),1m(env),10m(kernel),1m(dtb),-(rootfs) PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 247964K/262144K available (7794K kernel code, 417K rwdata, 2724K rodata, 320K init, 434K bss, 14180K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0x90800000 - 0xff000000 (1768 MB) lowmem : 0x80000000 - 0x90000000 ( 256 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80a4dad0 (10519 kB) .init : 0x80a4e000 - 0x80a9e000 ( 320 kB) .data : 0x80a9e000 - 0x80b066a0 ( 418 kB) .bss : 0x80b09000 - 0x80b75954 ( 435 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 mxc_clocksource_init 24000000 Switching to timer-based delay loop, resolution 41ns sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok /cpus/cpu@0 missing clock-frequency property CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80008280 - 0x800082d8 Brought up 1 CPUs SMP: Total of 1 processors activated (48.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized device-tree: Duplicate name in lcdif@021c8000, renamed to "display#1" VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver mxs-dma 1804000.dma-apbh: initialized SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c i2c-1: IMX I2C adapter registered i2c i2c-1: can't use DMA media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource mxc_timer1 NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded futex hash table entries: 256 (order: 2, 16384 bytes) VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) 息 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-weim 21b8000.weim: Driver registered. MIPI DSI driver module loaded MIPI DSI driver module loaded imx-sdma 20ec000.sdma: no event needs to be remapped imx-sdma 20ec000.sdma: loaded firmware 3.3 imx-sdma 20ec000.sdma: initialized 2018000.serial: ttymxc6 at MMIO 0x2018000 (irq = 20, base_baud = 5000000) is a IMX 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX console [ttymxc0] enabled 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 224, base_baud = 5000000) is a IMX 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 225, base_baud = 5000000) is a IMX 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 226, base_baud = 5000000) is a IMX 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 227, base_baud = 5000000) is a IMX 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 228, base_baud = 5000000) is a IMX 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 233, base_baud = 5000000) is a IMX [drm] Initialized drm 1.1.0 20060810 [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 5 cmdlinepart partitions found on MTD device gpmi-nand Creating 5 MTD partitions on "gpmi-nand": 0x000000000000-0x000000500000 : "boot" 0x000000500000-0x000000600000 : "env" 0x000000600000-0x000001000000 : "kernel" 0x000001000000-0x000001100000 : "dtb" 0x000001100000-0x000010000000 : "rootfs" gpmi-nand 1806000.gpmi-nand: driver registered. spidev spi0.0: buggy DT: spidev listed directly in DT ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:731 spidev_probe+0x1a0/0x1bc() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.15+ #5 Hardware name: Freescale i.MX6 Ultralite (Device Tree) [<80015b60>] (unwind_backtrace) from [<80012720>] (show_stack+0x10/0x14) [<80012720>] (show_stack) from [<8076b8a4>] (dump_stack+0x84/0xc4) [<8076b8a4>] (dump_stack) from [<8002ca38>] (warn_slowpath_common+0x80/0xb0) [<8002ca38>] (warn_slowpath_common) from [<8002cb04>] (warn_slowpath_null+0x1c/0x24) [<8002cb04>] (warn_slowpath_null) from [<8041d5f0>] (spidev_probe+0x1a0/0x1bc) [<8041d5f0>] (spidev_probe) from [<8041b2c0>] (spi_drv_probe+0x50/0x74) [<8041b2c0>] (spi_drv_probe) from [<803791a8>] (driver_probe_device+0x174/0x2b4) [<803791a8>] (driver_probe_device) from [<803777ac>] (bus_for_each_drv+0x60/0x94) [<803777ac>] (bus_for_each_drv) from [<80379004>] (device_attach+0x74/0x88) [<80379004>] (device_attach) from [<803786d4>] (bus_probe_device+0x84/0xa8) [<803786d4>] (bus_probe_device) from [<80376ab8>] (device_add+0x3e8/0x570) [<80376ab8>] (device_add) from [<8041bae8>] (spi_add_device+0x98/0x130) [<8041bae8>] (spi_add_device) from [<8041ced4>] (spi_register_master+0x4a4/0x714) [<8041ced4>] (spi_register_master) from [<8041e700>] (spi_bitbang_start+0x9c/0x108) [<8041e700>] (spi_bitbang_start) from [<80420b54>] (spi_imx_probe+0x410/0x670) [<80420b54>] (spi_imx_probe) from [<8037a8e8>] (platform_drv_probe+0x44/0xa4) [<8037a8e8>] (platform_drv_probe) from [<803791a8>] (driver_probe_device+0x174/0x2b4) [<803791a8>] (driver_probe_device) from [<803793b8>] (__driver_attach+0x8c/0x90) [<803793b8>] (__driver_attach) from [<80377704>] (bus_for_each_dev+0x68/0x9c) [<80377704>] (bus_for_each_dev) from [<80378944>] (bus_add_driver+0x148/0x1f0) [<80378944>] (bus_add_driver) from [<803799b4>] (driver_register+0x78/0xf8) [<803799b4>] (driver_register) from [<80009690>] (do_one_initcall+0x8c/0x1d4) [<80009690>] (do_one_initcall) from [<80a4edac>] (kernel_init_freeable+0x144/0x1e4) [<80a4edac>] (kernel_init_freeable) from [<807679d8>] (kernel_init+0xc/0xe8) [<807679d8>] (kernel_init) from [<8000f528>] (ret_from_fork+0x14/0x2c) ---[ end trace 9aa84f2daedfef01 ]--- spi_imx 2008000.ecspi: probed CAN device driver interface 20b4000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 20b4000.ethernet eth0: registered PHC device 0 2188000.ethernet supply phy not found, using dummy regulator pps pps1: new PPS source ptp1 fec 2188000.ethernet eth1: registered PHC device 1 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cdc_xr_usb_serial xr_usb_serial_common: Exar USB UART (serial port) driver usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver usb_ehset_test 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator 2184000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected 2184200.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected mousedev: PS/2 mouse device common for all mice input: 20cc000.snvs:snvs-powerkey as /devices/platform/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-powerkey/input/input0 ft5x0x_ts_init successful rtc-pcf8563 1-0051: chip found, driver version 0.4.3 rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized pxp-v4l2 pxp_v4l2: initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO sdhci-esdhc-imx 2190000.usdhc: No vmmc regulator found sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver 2198000.adc supply vref not found, using dummy regulator usbcore: registered new interface driver snd-usb-audio fsl-asrc 2034000.asrc: driver registered NET: Registered protocol family 26 NET: Registered protocol family 10 usb 1-1: new high-speed USB device number 2 using ci_hdrc sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered ubi0: attaching mtd4 usb 1-1: device no response, device descriptor read/64, error -71 random: nonblocking pool is initialized usb 1-1: device no response, device descriptor read/64, error -71 usb 1-1: new high-speed USB device number 3 using ci_hdrc ubi0: scanning is finished ubi0: attached mtd4 (name "rootfs", size 239 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 1908, bad PEBs: 4, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1073253703 ubi0: available PEBs: 0, total reserved PEBs: 1908, PEBs reserved for bad PEB handling: 36 ubi0: background thread "ubi_bgt0d" started, PID 81 usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 rtc-pcf8563 1-0051: setting system clock to 2019-12-10 17:35:55 UTC (1575999355) can-3v3: disabling ALSA device list: No soundcards found. UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery deferred UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 235667456 bytes (224 MiB, 1856 LEBs), journal size 11808768 bytes (11 MiB, 93 LEBs) UBIFS (ubi0:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5D68372B-A81B-486B-85A0-13C2199A059A, small LPT model VFS: Mounted root (ubifs filesystem) readonly on device 0:14. devtmpfs: mounted Freeing unused kernel memory: 320K (80a4e000 - 80a9e000) INIT: version 2.88 booting Error opening /dev/fb0: No such file or directory Starting udev scsi 0:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] 1966080 512-byte logical blocks: (1.00 GB/960 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk udevd[121]: starting version 3.1.5 UBIFS (ubi0:0): completing deferred recovery UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 150 UBIFS (ubi0:0): deferred recovery completed bootlogd: cannot allocate pseudo tty: No such file or directory FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 /usr/sbin/alsactl: load_state:1735: No soundcards found... Configuring network interfaces... Try to bring eth0 interface up...... fec 20b4000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet:01, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Set eth0 Done Try to bring eth0 interface up...... Usage: ifconfig [-a] [-v] [-s] [[]
] [add
[/]] [del
[/]] [[-]broadcast [
]] [[-]pointopoint [
]] [netmask
] [dstaddr
] [tunnel
] [outfill ] [keepalive ] [hw
] [metric ] [mtu ] [[-]trailers] [[-]arp] [[-]allmulti] [multicast] [[-]promisc] [mem_start ] [io_addr ] [irq ] [media ] [txqueuelen ] [[-]dynamic] [up|down] ... =Hardware Type. List of possible hardware types: loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP) slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP) ether (Ethernet) netrom (AMPR NET/ROM) tunnel (IPIP Tunnel) ppp (Point-to-Point Protocol) arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device) irda (IrLAP) =Address family. Default: inet List of possible address families: unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6) netrom (AMPR NET/ROM) fec 2188000.ethernet eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Set eth0 Done done. Starting system message bus: dbus. /sys/class/gpio/gpio136 is not exist Starting OpenBSD Secure Shell server: sshd done. Starting rpcbind daemon...done. Starting advanced power management daemon: No APM support in kernel (failed.) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Starting cron: sleep: invalid number '0.5' OK Starting Linux NFC daemon /run/media/sda1 exists... update by /run/media/sda1/patch-X300A... Update X300A... 'NandFlash/www/wwwpub/C0-6.asp' -> '/NandFlash/www/wwwpub/C0-6.asp' 'NandFlash/www/wwwpub/C0-6x.asp' -> '/NandFlash/www/wwwpub/C0-6x.asp' 'NandFlash/www/wwwpub' -> '/NandFlash/www/wwwpub' 'NandFlash/www' -> '/NandFlash/www' 'S90omapp' -> '/etc/init.d/S90omapp' /opt/NandFlash/www/wwwpub/images /opt/NandFlash/www/wwwpub/images 'hwtestExsetup_0' -> '/bin/hwtestExsetup' 'hwtestExsetup' -> '/opt/bin/hwtestExsetup' Update X300A ok update by /run/media/sda1/patch... Update patch... 'NandFlash/PwdInit.cfg' -> '/NandFlash/PwdInit.cfg' 'NandFlash/hwtestEx' -> '/NandFlash/hwtestEx' 'NandFlash/hwtestEx.ini' -> '/NandFlash/hwtestEx.ini' 'NandFlash/hwtestExsetup' -> '/NandFlash/hwtestExsetup' 'NandFlash/hwtestExsetup_0' -> '/NandFlash/hwtestExsetup_0' fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 'NandFlash/libomdev.so' -> '/NandFlash/libomdev.so' 'NandFlash/libomser.so' -> '/NandFlash/libomser.so' 'NandFlash/libomserd.so' -> '/NandFlash/libomserd.so' 'NandFlash/libomsm.so' -> '/NandFlash/libomsm.so' 'NandFlash/libomsuw.so' -> '/NandFlash/libomsuw.so' 'NandFlash/omAppPost' -> '/NandFlash/omAppPost' 'NandFlash/omappsusetup' -> '/NandFlash/omappsusetup' 'NandFlash/www/wwwpub/A3-1280.asp' -> '/NandFlash/www/wwwpub/A3-1280.asp' 'NandFlash/www/wwwpub/B1.html' -> '/NandFlash/www/wwwpub/B1.html' 'NandFlash/www/wwwpub/A3-AI.asp' -> '/NandFlash/www/wwwpub/A3-AI.asp' 'NandFlash/www/wwwpub/omdev-com4.html' -> '/NandFlash/www/wwwpub/omdev-com4.html' 'NandFlash/www/wwwpub/hwtest.html' -> '/NandFlash/www/wwwpub/hwtest.html' 'NandFlash/www/wwwpub/C0-sms.asp' -> '/NandFlash/www/wwwpub/C0-sms.asp' 'NandFlash/www/wwwpub/C0-4x.asp' -> '/NandFlash/www/wwwpub/C0-4x.asp' 'NandFlash/www/wwwpub/C0-3x.asp' -> '/NandFlash/www/wwwpub/C0-3x.asp' 'NandFlash/www/wwwpub/C0-1x.asp' -> '/NandFlash/www/wwwpub/C0-1x.asp' 'NandFlash/www/wwwpub/C0-6x.asp' -> '/NandFlash/www/wwwpub/C0-6x.asp' 'NandFlash/www/wwwpub/C0-6.asp' -> '/NandFlash/www/wwwpub/C0-6.asp' 'NandFlash/www/wwwpub/B2.html' -> '/NandFlash/www/wwwpub/B2.html' 'NandFlash/www/wwwpub/login.asp' -> '/NandFlash/www/wwwpub/login.asp' 'NandFlash/www/wwwpub/index.asp' -> '/NandFlash/www/wwwpub/index.asp' 'NandFlash/www/wwwpub/jsn/A3-2304.js' -> '/NandFlash/www/wwwpub/jsn/A3-2304.js' 'NandFlash/www/wwwpub/jsn' -> '/NandFlash/www/wwwpub/jsn' 'NandFlash/www/wwwpub/js/purify.min.js' -> '/NandFlash/www/wwwpub/js/purify.min.js' 'NandFlash/www/wwwpub/js/md5b.min.js' -> '/NandFlash/www/wwwpub/js/md5b.min.js' 'NandFlash/www/wwwpub/js' -> '/NandFlash/www/wwwpub/js' 'NandFlash/www/wwwpub' -> '/NandFlash/www/wwwpub' 'NandFlash/www' -> '/NandFlash/www' '/NandFlash/omappsusetup' -> '/opt/bin/omappsusetup' chmod: /opt/bin/omappsusetu: No such file or directory '/NandFlash/hwtestExsetup_0' -> '/bin/hwtestExsetup' '/NandFlash/hwtestExsetup' -> '/opt/bin/hwtestExsetup' Update patch ok om-di[8]: 119 116 115 133 132 68 67 120 om-do[4]: 66 87 65 88 om-sys[6]: 135 !136 !128 !129 !130 18 RESULT= Starting goahead: OK Running local boot scripts (/etc/rc.local). Freescale i.MX Release Distro 4.1.15-2.0.1 OM-A6-X300A /dev/ttymxc0 OM-A6-X300A login: U-Boot 2016.03-g28cc50d-dirty (Dec 22 2020 - 17:29:28 +0800) CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 115C) at 37C Reset cause: POR Board: MYD-Y6ULL 14x14 DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC0 Error: FEC0 address not set. Normal Boot Hit any key to stop autoboot: 3  2  1  0 NAND read: device 0 offset 0x600000, size 0xa00000 10485760 bytes read: OK NAND read: device 0 offset 0x1000000, size 0x100000 1048576 bytes read: OK Kernel image @ 0x80800000 [ 0x000000 - 0x5f0958 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c149 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.1.15+ (root@localhost) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #5 SMP PREEMPT Tue Dec 22 17:43:28 CST 2020 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Freescale i.MX6 ULL 14x14 EVK Board Reserved memory: failed to allocate memory for node 'linux,cma' Memory policy: Data cache writealloc PERCPU: Embedded 12 pages/cpu @8fdd3000 s16960 r8192 d24000 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttymxc0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs mtdparts=gpmi-nand:5m(boot),1m(env),10m(kernel),1m(dtb),-(rootfs) PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 247964K/262144K available (7794K kernel code, 417K rwdata, 2724K rodata, 320K init, 434K bss, 14180K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0x90800000 - 0xff000000 (1768 MB) lowmem : 0x80000000 - 0x90000000 ( 256 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80a4dad0 (10519 kB) .init : 0x80a4e000 - 0x80a9e000 ( 320 kB) .data : 0x80a9e000 - 0x80b066a0 ( 418 kB) .bss : 0x80b09000 - 0x80b75954 ( 435 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 mxc_clocksource_init 24000000 Switching to timer-based delay loop, resolution 41ns sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok /cpus/cpu@0 missing clock-frequency property CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80008280 - 0x800082d8 Brought up 1 CPUs SMP: Total of 1 processors activated (48.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized device-tree: Duplicate name in lcdif@021c8000, renamed to "display#1" VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver mxs-dma 1804000.dma-apbh: initialized SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c i2c-1: IMX I2C adapter registered i2c i2c-1: can't use DMA media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource mxc_timer1 NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded futex hash table entries: 256 (order: 2, 16384 bytes) VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) 息 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-weim 21b8000.weim: Driver registered. MIPI DSI driver module loaded MIPI DSI driver module loaded imx-sdma 20ec000.sdma: no event needs to be remapped imx-sdma 20ec000.sdma: loaded firmware 3.3 imx-sdma 20ec000.sdma: initialized 2018000.serial: ttymxc6 at MMIO 0x2018000 (irq = 20, base_baud = 5000000) is a IMX 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX console [ttymxc0] enabled 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 224, base_baud = 5000000) is a IMX 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 225, base_baud = 5000000) is a IMX 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 226, base_baud = 5000000) is a IMX 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 227, base_baud = 5000000) is a IMX 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 228, base_baud = 5000000) is a IMX 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 233, base_baud = 5000000) is a IMX [drm] Initialized drm 1.1.0 20060810 [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 5 cmdlinepart partitions found on MTD device gpmi-nand Creating 5 MTD partitions on "gpmi-nand": 0x000000000000-0x000000500000 : "boot" 0x000000500000-0x000000600000 : "env" 0x000000600000-0x000001000000 : "kernel" 0x000001000000-0x000001100000 : "dtb" 0x000001100000-0x000010000000 : "rootfs" gpmi-nand 1806000.gpmi-nand: driver registered. spidev spi0.0: buggy DT: spidev listed directly in DT ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:731 spidev_probe+0x1a0/0x1bc() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.15+ #5 Hardware name: Freescale i.MX6 Ultralite (Device Tree) [<80015b60>] (unwind_backtrace) from [<80012720>] (show_stack+0x10/0x14) [<80012720>] (show_stack) from [<8076b8a4>] (dump_stack+0x84/0xc4) [<8076b8a4>] (dump_stack) from [<8002ca38>] (warn_slowpath_common+0x80/0xb0) [<8002ca38>] (warn_slowpath_common) from [<8002cb04>] (warn_slowpath_null+0x1c/0x24) [<8002cb04>] (warn_slowpath_null) from [<8041d5f0>] (spidev_probe+0x1a0/0x1bc) [<8041d5f0>] (spidev_probe) from [<8041b2c0>] (spi_drv_probe+0x50/0x74) [<8041b2c0>] (spi_drv_probe) from [<803791a8>] (driver_probe_device+0x174/0x2b4) [<803791a8>] (driver_probe_device) from [<803777ac>] (bus_for_each_drv+0x60/0x94) [<803777ac>] (bus_for_each_drv) from [<80379004>] (device_attach+0x74/0x88) [<80379004>] (device_attach) from [<803786d4>] (bus_probe_device+0x84/0xa8) [<803786d4>] (bus_probe_device) from [<80376ab8>] (device_add+0x3e8/0x570) [<80376ab8>] (device_add) from [<8041bae8>] (spi_add_device+0x98/0x130) [<8041bae8>] (spi_add_device) from [<8041ced4>] (spi_register_master+0x4a4/0x714) [<8041ced4>] (spi_register_master) from [<8041e700>] (spi_bitbang_start+0x9c/0x108) [<8041e700>] (spi_bitbang_start) from [<80420b54>] (spi_imx_probe+0x410/0x670) [<80420b54>] (spi_imx_probe) from [<8037a8e8>] (platform_drv_probe+0x44/0xa4) [<8037a8e8>] (platform_drv_probe) from [<803791a8>] (driver_probe_device+0x174/0x2b4) [<803791a8>] (driver_probe_device) from [<803793b8>] (__driver_attach+0x8c/0x90) [<803793b8>] (__driver_attach) from [<80377704>] (bus_for_each_dev+0x68/0x9c) [<80377704>] (bus_for_each_dev) from [<80378944>] (bus_add_driver+0x148/0x1f0) [<80378944>] (bus_add_driver) from [<803799b4>] (driver_register+0x78/0xf8) [<803799b4>] (driver_register) from [<80009690>] (do_one_initcall+0x8c/0x1d4) [<80009690>] (do_one_initcall) from [<80a4edac>] (kernel_init_freeable+0x144/0x1e4) [<80a4edac>] (kernel_init_freeable) from [<807679d8>] (kernel_init+0xc/0xe8) [<807679d8>] (kernel_init) from [<8000f528>] (ret_from_fork+0x14/0x2c) ---[ end trace 6bdfd76dc2e63c40 ]--- spi_imx 2008000.ecspi: probed CAN device driver interface 20b4000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 20b4000.ethernet eth0: registered PHC device 0 2188000.ethernet supply phy not found, using dummy regulator pps pps1: new PPS source ptp1 fec 2188000.ethernet eth1: registered PHC device 1 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cdc_xr_usb_serial xr_usb_serial_common: Exar USB UART (serial port) driver usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver usb_ehset_test 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator 2184000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected 2184200.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected mousedev: PS/2 mouse device common for all mice input: 20cc000.snvs:snvs-powerkey as /devices/platform/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-powerkey/input/input0 ft5x0x_ts_init successful rtc-pcf8563 1-0051: chip found, driver version 0.4.3 rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized pxp-v4l2 pxp_v4l2: initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO sdhci-esdhc-imx 2190000.usdhc: No vmmc regulator found sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver 2198000.adc supply vref not found, using dummy regulator usbcore: registered new interface driver snd-usb-audio fsl-asrc 2034000.asrc: driver registered NET: Registered protocol family 26 NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered ubi0: attaching mtd4 random: nonblocking pool is initialized ubi0: scanning is finished ubi0: attached mtd4 (name "rootfs", size 239 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 1908, bad PEBs: 4, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1073253703 ubi0: available PEBs: 0, total reserved PEBs: 1908, PEBs reserved for bad PEB handling: 36 ubi0: background thread "ubi_bgt0d" started, PID 80 rtc-pcf8563 1-0051: setting system clock to 2019-12-10 17:36:33 UTC (1575999393) can-3v3: disabling ALSA device list: No soundcards found. UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery deferred UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 235667456 bytes (224 MiB, 1856 LEBs), journal size 11808768 bytes (11 MiB, 93 LEBs) UBIFS (ubi0:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5D68372B-A81B-486B-85A0-13C2199A059A, small LPT model VFS: Mounted root (ubifs filesystem) readonly on device 0:14. devtmpfs: mounted Freeing unused kernel memory: 320K (80a4e000 - 80a9e000) INIT: version 2.88 booting Error opening /dev/fb0: No such file or directory Starting udev udevd[116]: starting version 3.1.5 UBIFS (ubi0:0): completing deferred recovery UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 146 UBIFS (ubi0:0): deferred recovery completed bootlogd: cannot allocate pseudo tty: No such file or directory ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 /usr/sbin/alsactl: load_state:1735: No soundcards found... Configuring network interfaces... Try to bring eth0 interface up...... fec 20b4000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet:01, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Set eth0 Done Try to bring eth0 interface up...... Usage: ifconfig [-a] [-v] [-s] [[]
] [add
[/]] [del
[/]] [[-]broadcast [
]] [[-]pointopoint [
]] [netmask
] [dstaddr
] [tunnel
] [outfill ] [keepalive ] [hw
] [metric ] [mtu ] [[-]trailers] [[-]arp] [[-]allmulti] [multicast] [[-]promisc] [mem_start ] [io_addr ] [irq ] [media ] [txqueuelen ] [[-]dynamic] [up|down] ... =Hardware Type. List of possible hardware types: loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP) slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP) ether (Ethernet) netrom (AMPR NET/ROM) tunnel (IPIP Tunnel) ppp (Point-to-Point Protocol) arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device) irda (IrLAP) =Address family. Default: inet List of possible address families: unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6) netrom (AMPR NET/ROM) fec 2188000.ethernet eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Set eth0 Done done. Starting system message bus: dbus. /sys/class/gpio/gpio136 is not exist Starting OpenBSD Secure Shell server: sshd done. Starting rpcbind daemon...done. Starting advanced power management daemon: No APM support in kernel (failed.) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Starting cron: sleep: invalid number '0.5' OK Starting Linux NFC daemon /opt/NandFlash/www/wwwpub/images /opt/NandFlash/www/wwwpub/images om-di[8]: 119 116 115 133 132 68 67 120 om-do[4]: 66 87 65 88 om-sys[6]: 135 !136 !128 !129 !130 18 PwdInit users: all removed 'PwdInit.cfg' Starting omAppSU: OK fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready AlmMngr init... AlmManager LoadChkItem: 45 AlmManager LoadAlmTime: 5 AlmManager LoadAlmRecv: 2 AlmManager LoadAlmDef: 14 AlmManager LoadAlmDev... AlmManager LoadAlmDev 選強1 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強2 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強3 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強4 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強5 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強6 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強7 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev 選強8 GetSM type=2562 AlmManager LoadAlmDev GetSer OMI1: 0x800000 AlmManager LoadAlmDev GetSer ok AlmManager LoadAlmDev ser:OMI1: 800000 open:1 AlmManager LoadAlmDev: 8 smtp: svr= acc= sub=字型烏少 AlmMngr init end RESULT= Starting goahead: OK Starting omTray: OK Running local boot scripts (/etc/rc.local). Freescale i.MX Release Distro 4.1.15-2.0.1 OM-A6-X300A /dev/ttymxc0 OM-A6-X300A login: Stopping omAppPost: killall: omAppPost: no process killed OK Starting omAppPost: OK Stopping omOneNetPost: killall: omOneNetPost: no process killed OK Starting omOneNetPost: OK