ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENVMON-MIB.my -- ***************************************************************** -- CISCO-ENVMON-MIB.my: CISCO Environmental Monitor MIB file -- -- November 1994 Sandra C. Durham/Jeffrey T. Johnson -- -- Copyright (c) 1994-2003, 2004 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- CISCO-ENVMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI; ciscoEnvMonMIB MODULE-IDENTITY LAST-UPDATED "200312010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module to describe the status of the Environmental Monitor on those devices which support one." REVISION "200312010000Z" DESCRIPTION "Added c37xx (13) and other (14) as values for ciscoEnvMonPresent" REVISION "200311250000Z" DESCRIPTION "Added ciscoEnvMonMIBMiscNotifGroup." REVISION "200210150000Z" DESCRIPTION "Added c7600(12) as values for ciscoEnvMonPresent" REVISION "200207170000Z" DESCRIPTION "Added optional groups ciscoEnvMonEnableStatChangeGroup and ciscoEnvMonStatChangeNotifGroup." REVISION "200202040000Z" DESCRIPTION "Added osr7600(11) as values for ciscoEnvMonPresent" REVISION "200108300000Z" DESCRIPTION "Added c10000(10) as values for ciscoEnvMonPresent" REVISION "200108160000Z" DESCRIPTION "Added cat4000(9) as values for ciscoEnvMonPresent" REVISION "200105070000Z" DESCRIPTION "Added cat6000(7),ubr7200(8) as values for ciscoEnvMonPresent" REVISION "200001310000Z" DESCRIPTION "Add notFunctioning to CiscoEnvMonState. " REVISION "9810220000Z" DESCRIPTION "Renamed enumerated value internalRPS(5) as internalRedundant(5) and added description for ciscoEnvMonSupplySource enumerated values. " REVISION "9808050000Z" DESCRIPTION "Add enumerated value internalRPS(5) to ciscoEnvMonSupplySource. " REVISION "9611120000Z" DESCRIPTION "Add monitoring support for c3600 series router" REVISION "9508150000Z" DESCRIPTION "Specify a correct (non-negative) range for several index objects." REVISION "9503130000Z" DESCRIPTION "Miscellaneous changes including monitoring support for c7000 series redundant power supplies." ::= { ciscoMgmt 13 } CiscoEnvMonState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. warning(2): the environment is bad, such as temperature above normal operation range but not too high. critical(3): the environment is very bad, such as temperature much higher than normal operation limit. shutdown(4): the environment is the worst, the system should be shutdown immediately. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly, such as a temperature sensor generates a abnormal data like 1000 C. " SYNTAX INTEGER { normal(1), warning(2), critical(3), shutdown(4), notPresent(5), notFunctioning(6) } CiscoSignedGauge ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the current value of an entity, as a signed integer." SYNTAX Integer32 ciscoEnvMonObjects OBJECT IDENTIFIER ::= { ciscoEnvMonMIB 1 } ciscoEnvMonPresent OBJECT-TYPE SYNTAX INTEGER { oldAgs (1), ags (2), c7000 (3), ci (4), cAccessMon (6), cat6000 (7), ubr7200 (8), cat4000 (9), c10000 (10), osr7600(11), c7600 (12), c37xx (13), other (14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of environmental monitor located in the chassis. An oldAgs environmental monitor card is identical to an ags environmental card except that it is not capable of supplying data, and hence no instance of the remaining objects in this MIB will be returned in response to an SNMP query. Note that only a firmware upgrade is required to convert an oldAgs into an ags card." ::= { ciscoEnvMonObjects 1 } ciscoEnvMonVoltageStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoEnvMonVoltageStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of voltage status maintained by the environmental monitor." ::= { ciscoEnvMonObjects 2 } ciscoEnvMonVoltageStatusEntry OBJECT-TYPE SYNTAX CiscoEnvMonVoltageStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the voltage status table, representing the status of the associated testpoint maintained by the environmental monitor." INDEX { ciscoEnvMonVoltageStatusIndex } ::= { ciscoEnvMonVoltageStatusTable 1 } CiscoEnvMonVoltageStatusEntry ::= SEQUENCE { ciscoEnvMonVoltageStatusIndex Integer32, ciscoEnvMonVoltageStatusDescr DisplayString, ciscoEnvMonVoltageStatusValue CiscoSignedGauge, ciscoEnvMonVoltageThresholdLow Integer32, ciscoEnvMonVoltageThresholdHigh Integer32, ciscoEnvMonVoltageLastShutdown Integer32, ciscoEnvMonVoltageState CiscoEnvMonState } ciscoEnvMonVoltageStatusIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ciscoEnvMonVoltageStatusEntry 1 } ciscoEnvMonVoltageStatusDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry." ::= { ciscoEnvMonVoltageStatusEntry 2 } ciscoEnvMonVoltageStatusValue OBJECT-TYPE SYNTAX CiscoSignedGauge UNITS "millivolts" MAX-ACCESS read-only STATUS current DESCRIPTION "The current measurement of the testpoint being instrumented." ::= { ciscoEnvMonVoltageStatusEntry 3 } ciscoEnvMonVoltageThresholdLow OBJECT-TYPE SYNTAX Integer32 UNITS "millivolts" MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest value that the associated instance of the object ciscoEnvMonVoltageStatusValue may obtain before an emergency shutdown of the managed device is initiated." ::= { ciscoEnvMonVoltageStatusEntry 4 } ciscoEnvMonVoltageThresholdHigh OBJECT-TYPE SYNTAX Integer32 UNITS "millivolts" MAX-ACCESS read-only STATUS current DESCRIPTION "The highest value that the associated instance of the object ciscoEnvMonVoltageStatusValue may obtain before an emergency shutdown of the managed device is initiated." ::= { ciscoEnvMonVoltageStatusEntry 5 } ciscoEnvMonVoltageLastShutdown OBJECT-TYPE SYNTAX Integer32 UNITS "millivolts" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the associated instance of the object ciscoEnvMonVoltageStatusValue at the time an emergency shutdown of the managed device was last initiated. This value is stored in non-volatile RAM and hence is able to survive the shutdown." ::= { ciscoEnvMonVoltageStatusEntry 6 } ciscoEnvMonVoltageState OBJECT-TYPE SYNTAX CiscoEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the testpoint being instrumented." ::= { ciscoEnvMonVoltageStatusEntry 7 } ciscoEnvMonTemperatureStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoEnvMonTemperatureStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ambient temperature status maintained by the environmental monitor." ::= { ciscoEnvMonObjects 3 } ciscoEnvMonTemperatureStatusEntry OBJECT-TYPE SYNTAX CiscoEnvMonTemperatureStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor." INDEX { ciscoEnvMonTemperatureStatusIndex } ::= { ciscoEnvMonTemperatureStatusTable 1 } CiscoEnvMonTemperatureStatusEntry ::= SEQUENCE { ciscoEnvMonTemperatureStatusIndex Integer32, ciscoEnvMonTemperatureStatusDescr DisplayString, ciscoEnvMonTemperatureStatusValue Gauge32, ciscoEnvMonTemperatureThreshold Integer32, ciscoEnvMonTemperatureLastShutdown Integer32, ciscoEnvMonTemperatureState CiscoEnvMonState } ciscoEnvMonTemperatureStatusIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ciscoEnvMonTemperatureStatusEntry 1 } ciscoEnvMonTemperatureStatusDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry." ::= { ciscoEnvMonTemperatureStatusEntry 2 } ciscoEnvMonTemperatureStatusValue OBJECT-TYPE SYNTAX Gauge32 UNITS "degrees Celsius" MAX-ACCESS read-only STATUS current DESCRIPTION "The current measurement of the testpoint being instrumented." ::= { ciscoEnvMonTemperatureStatusEntry 3 } ciscoEnvMonTemperatureThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "degrees Celsius" MAX-ACCESS read-only STATUS current DESCRIPTION "The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated." ::= { ciscoEnvMonTemperatureStatusEntry 4 } ciscoEnvMonTemperatureLastShutdown OBJECT-TYPE SYNTAX Integer32 UNITS "degrees Celsius" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the associated instance of the object ciscoEnvMonTemperatureStatusValue at the time an emergency shutdown of the managed device was last initiated. This value is stored in non-volatile RAM and hence is able to survive the shutdown." ::= { ciscoEnvMonTemperatureStatusEntry 5 } ciscoEnvMonTemperatureState OBJECT-TYPE SYNTAX CiscoEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the testpoint being instrumented." ::= { ciscoEnvMonTemperatureStatusEntry 6 } ciscoEnvMonFanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoEnvMonFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of fan status maintained by the environmental monitor." ::= { ciscoEnvMonObjects 4 } ciscoEnvMonFanStatusEntry OBJECT-TYPE SYNTAX CiscoEnvMonFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor." INDEX { ciscoEnvMonFanStatusIndex } ::= { ciscoEnvMonFanStatusTable 1 } CiscoEnvMonFanStatusEntry ::= SEQUENCE { ciscoEnvMonFanStatusIndex Integer32, ciscoEnvMonFanStatusDescr DisplayString, ciscoEnvMonFanState CiscoEnvMonState } ciscoEnvMonFanStatusIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the fan being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ciscoEnvMonFanStatusEntry 1 } ciscoEnvMonFanStatusDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the fan being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry." ::= { ciscoEnvMonFanStatusEntry 2 } ciscoEnvMonFanState OBJECT-TYPE SYNTAX CiscoEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the fan being instrumented." ::= { ciscoEnvMonFanStatusEntry 3 } ciscoEnvMonSupplyStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoEnvMonSupplyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of power supply status maintained by the environmental monitor card." ::= { ciscoEnvMonObjects 5 } ciscoEnvMonSupplyStatusEntry OBJECT-TYPE SYNTAX CiscoEnvMonSupplyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card." INDEX { ciscoEnvMonSupplyStatusIndex } ::= { ciscoEnvMonSupplyStatusTable 1 } CiscoEnvMonSupplyStatusEntry ::= SEQUENCE { ciscoEnvMonSupplyStatusIndex Integer32, ciscoEnvMonSupplyStatusDescr DisplayString, ciscoEnvMonSupplyState CiscoEnvMonState, ciscoEnvMonSupplySource INTEGER } ciscoEnvMonSupplyStatusIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ciscoEnvMonSupplyStatusEntry 1 } ciscoEnvMonSupplyStatusDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry." ::= { ciscoEnvMonSupplyStatusEntry 2 } ciscoEnvMonSupplyState OBJECT-TYPE SYNTAX CiscoEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the power supply being instrumented." ::= { ciscoEnvMonSupplyStatusEntry 3 } ciscoEnvMonSupplySource OBJECT-TYPE SYNTAX INTEGER { unknown(1), ac(2), dc(3), externalPowerSupply(4), internalRedundant(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The power supply source. unknown - Power supply source unknown ac - AC power supply dc - DC power supply externalPowerSupply - External power supply internalRedundant - Internal redundant power supply " ::= { ciscoEnvMonSupplyStatusEntry 4 } ciscoEnvMonAlarmContacts OBJECT-TYPE SYNTAX BITS { minorVisual(0), majorVisual(1), criticalVisual(2), minorAudible(3), majorAudible(4), criticalAudible(5), input(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Each bit is set to reflect the respective alarm being set. The bit will be cleared when the respective alarm is cleared." ::= { ciscoEnvMonObjects 6 } ciscoEnvMonMIBNotificationEnables OBJECT IDENTIFIER ::= { ciscoEnvMonMIB 2 } ciscoEnvMonEnableShutdownNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonShutdownNotification. A false value will prevent shutdown notifications from being generated by this system." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 1 } ciscoEnvMonEnableVoltageNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonVoltageNotification. A false value will prevent voltage notifications from being generated by this system. This object is deprecated in favour of ciscoEnvMonEnableStatChangeNotif." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 2 } ciscoEnvMonEnableTemperatureNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonTemperatureNotification. A false value prevents temperature notifications from being sent by this entity. This object is deprecated in favour of ciscoEnvMonEnableStatChangeNotif." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 3 } ciscoEnvMonEnableFanNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonFanNotification. A false value prevents fan notifications from being sent by this entity. This object is deprecated in favour of ciscoEnvMonEnableStatChangeNotif." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 4 } ciscoEnvMonEnableRedundantSupplyNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonRedundantSupplyNotification. A false value prevents redundant supply notifications from being generated by this system. This object is deprecated in favour of ciscoEnvMonEnableStatChangeNotif." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 5 } ciscoEnvMonEnableStatChangeNotif OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ciscoEnvMonVoltStatusChangeNotif, ciscoEnvMonTempStatusChangeNotif, ciscoEnvMonFanStatusChangeNotif and ciscoEnvMonSuppStatusChangeNotif. A false value will prevent these notifications from being generated by this system." DEFVAL { false } ::= { ciscoEnvMonMIBNotificationEnables 6 } -- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications -- that are backward compatible with SNMPv1 Traps. ciscoEnvMonMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoEnvMonMIB 3 } ciscoEnvMonMIBNotifications OBJECT IDENTIFIER ::= { ciscoEnvMonMIBNotificationPrefix 0 } ciscoEnvMonShutdownNotification NOTIFICATION-TYPE -- no OBJECTS STATUS current DESCRIPTION "A ciscoEnvMonShutdownNotification is sent if the environmental monitor detects a testpoint reaching a critical state and is about to initiate a shutdown. This notification contains no objects so that it may be encoded and sent in the shortest amount of time possible. Even so, management applications should not rely on receiving such a notification as it may not be sent before the shutdown completes." ::= { ciscoEnvMonMIBNotifications 1 } ciscoEnvMonVoltageNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageStatusValue, ciscoEnvMonVoltageState } STATUS deprecated DESCRIPTION "A ciscoEnvMonVoltageNotification is sent if the voltage measured at a given testpoint is outside the normal range for the testpoint (i.e. is at the warning, critical, or shutdown stage). Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification. This notification is deprecated in favour of ciscoEnvMonVoltStatusChangeNotif." ::= { ciscoEnvMonMIBNotifications 2 } ciscoEnvMonTemperatureNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonTemperatureStatusDescr, ciscoEnvMonTemperatureStatusValue, ciscoEnvMonTemperatureState } STATUS deprecated DESCRIPTION "A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given testpoint is outside the normal range for the testpoint (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification. This notification is deprecated in favour of ciscoEnvMonTempStatusChangeNotif." ::= { ciscoEnvMonMIBNotifications 3 } ciscoEnvMonFanNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonFanStatusDescr, ciscoEnvMonFanState } STATUS deprecated DESCRIPTION "A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where extant) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification. This notification is deprecated in favour of ciscoEnvMonFanStatusChangeNotif." ::= { ciscoEnvMonMIBNotifications 4 } ciscoEnvMonRedundantSupplyNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonSupplyStatusDescr, ciscoEnvMonSupplyState } STATUS deprecated DESCRIPTION "A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where extant) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification. This notification is deprecated in favour of ciscoEnvMonSuppStatusChangeNotif." ::= { ciscoEnvMonMIBNotifications 5 } ciscoEnvMonVoltStatusChangeNotif NOTIFICATION-TYPE OBJECTS { ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageStatusValue, ciscoEnvMonVoltageState } STATUS current DESCRIPTION "A ciscoEnvMonVoltStatusChangeNotif is sent if there is change in the state of a device being monitored by ciscoEnvMonVoltageState." ::= { ciscoEnvMonMIBNotifications 6 } ciscoEnvMonTempStatusChangeNotif NOTIFICATION-TYPE OBJECTS { ciscoEnvMonTemperatureStatusDescr, ciscoEnvMonTemperatureStatusValue, ciscoEnvMonTemperatureState } STATUS current DESCRIPTION "A ciscoEnvMonTempStatusChangeNotif is sent if there is change in the state of a device being monitored by ciscoEnvMonTemperatureState." ::= { ciscoEnvMonMIBNotifications 7 } ciscoEnvMonFanStatusChangeNotif NOTIFICATION-TYPE OBJECTS { ciscoEnvMonFanStatusDescr, ciscoEnvMonFanState } STATUS current DESCRIPTION "A ciscoEnvMonFanStatusChangeNotif is sent if there is change in the state of a device being monitored by ciscoEnvMonFanState." ::= { ciscoEnvMonMIBNotifications 8 } ciscoEnvMonSuppStatusChangeNotif NOTIFICATION-TYPE OBJECTS { ciscoEnvMonSupplyStatusDescr, ciscoEnvMonSupplyState } STATUS current DESCRIPTION "A ciscoEnvMonSupplyStatChangeNotif is sent if there is change in the state of a device being monitored by ciscoEnvMonSupplyState." ::= { ciscoEnvMonMIBNotifications 9 } -- conformance information ciscoEnvMonMIBConformance OBJECT IDENTIFIER ::= { ciscoEnvMonMIB 4 } ciscoEnvMonMIBCompliances OBJECT IDENTIFIER ::= { ciscoEnvMonMIBConformance 1 } ciscoEnvMonMIBGroups OBJECT IDENTIFIER ::= { ciscoEnvMonMIBConformance 2 } -- compliance statements ciscoEnvMonMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Environmental Monitor MIB. This is deprecated and new compliance ciscoEnvMonMIBComplianceRev1 is added." MODULE -- this module MANDATORY-GROUPS { ciscoEnvMonMIBGroup } ::= { ciscoEnvMonMIBCompliances 1 } ciscoEnvMonMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco Environmental Monitor MIB." MODULE -- this module MANDATORY-GROUPS { ciscoEnvMonMIBGroupRev, ciscoEnvMonMIBNotifGroup } GROUP ciscoEnvMonEnableStatChangeGroup DESCRIPTION "The ciscoEnvMonEnableStatChangeGroup is optional. This group is applicable for implementations which need status change notifications for environmental monitoring." GROUP ciscoEnvMonStatChangeNotifGroup DESCRIPTION "The ciscoEnvMonStatChangeNotifGroup is optional. This group is applicable for implementations which need status change notifications for environmental monitoring." ::= { ciscoEnvMonMIBCompliances 2 } -- units of conformance ciscoEnvMonMIBGroup OBJECT-GROUP OBJECTS { ciscoEnvMonPresent, ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageStatusValue, ciscoEnvMonVoltageThresholdLow, ciscoEnvMonVoltageThresholdHigh, ciscoEnvMonVoltageLastShutdown, ciscoEnvMonVoltageState, ciscoEnvMonTemperatureStatusDescr, ciscoEnvMonTemperatureStatusValue, ciscoEnvMonTemperatureThreshold, ciscoEnvMonTemperatureLastShutdown, ciscoEnvMonTemperatureState, ciscoEnvMonFanStatusDescr, ciscoEnvMonFanState, ciscoEnvMonSupplyStatusDescr, ciscoEnvMonSupplyState, ciscoEnvMonSupplySource, ciscoEnvMonAlarmContacts, ciscoEnvMonEnableShutdownNotification, ciscoEnvMonEnableVoltageNotification, ciscoEnvMonEnableTemperatureNotification, ciscoEnvMonEnableFanNotification, ciscoEnvMonEnableRedundantSupplyNotification } STATUS deprecated DESCRIPTION "A collection of objects providing environmental monitoring capability to a cisco chassis. This group is deprecated in favour of ciscoEnvMonMIBGroupRev." ::= { ciscoEnvMonMIBGroups 1 } ciscoEnvMonMIBGroupRev OBJECT-GROUP OBJECTS { ciscoEnvMonPresent, ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageStatusValue, ciscoEnvMonVoltageThresholdLow, ciscoEnvMonVoltageThresholdHigh, ciscoEnvMonVoltageLastShutdown, ciscoEnvMonVoltageState, ciscoEnvMonTemperatureStatusDescr, ciscoEnvMonTemperatureStatusValue, ciscoEnvMonTemperatureThreshold, ciscoEnvMonTemperatureLastShutdown, ciscoEnvMonTemperatureState, ciscoEnvMonFanStatusDescr, ciscoEnvMonFanState, ciscoEnvMonSupplyStatusDescr, ciscoEnvMonSupplyState, ciscoEnvMonSupplySource, ciscoEnvMonAlarmContacts, ciscoEnvMonEnableShutdownNotification } STATUS current DESCRIPTION "A collection of objects providing environmental monitoring capability to a cisco chassis." ::= { ciscoEnvMonMIBGroups 2 } ciscoEnvMonEnableStatChangeGroup OBJECT-GROUP OBJECTS { ciscoEnvMonEnableStatChangeNotif } STATUS current DESCRIPTION "A collection of objects providing enabling/disabling of the status change notifications for environmental monitoring." ::= { ciscoEnvMonMIBGroups 3 } ciscoEnvMonMIBNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoEnvMonShutdownNotification } STATUS current DESCRIPTION "A notification group providing shutdown notification for environmental monitoring. " ::= { ciscoEnvMonMIBGroups 4 } ciscoEnvMonStatChangeNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoEnvMonVoltStatusChangeNotif, ciscoEnvMonTempStatusChangeNotif, ciscoEnvMonFanStatusChangeNotif, ciscoEnvMonSuppStatusChangeNotif } STATUS current DESCRIPTION "A collection of notifications providing the status change for environmental monitoring." ::= { ciscoEnvMonMIBGroups 5 } ciscoEnvMonMIBMiscNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoEnvMonVoltageNotification, ciscoEnvMonTemperatureNotification, ciscoEnvMonFanNotification, ciscoEnvMonRedundantSupplyNotification } STATUS deprecated DESCRIPTION "A collection of various notifications for the enviromental monitoring mib module. The notifications the group and the group are both in deprecated state. The notifications in the group were deprecated in favour of notifications in ciscoEnvMonStatChangeNotifGroup." ::= { ciscoEnvMonMIBGroups 6 } END